1.Push inside grip away from handle |
2.Console lifted straight up |
3.Unplug the console |
4.Three large screws |
5.And a small screw |
6.Three Torx-20 along bottom |
7.Lift the panel away |
8.Undo some connectors |
9.Alarm LED connector too |
10.Lift panel up off windowsill |
11.Pull door latch cable rearward |
12.Swing cable aside and unhook |
13.Panel removed exposing door |
14.Slit tape carefully |
15.Wires of interest exposed |
16.Temporary position |
17.Module all connected |
18.Peel-n-Stick after testing |
19.Taped and tidy up |
20.Peek at AutoWindow |
Thanks Steve for submitting the photos! |